Furnace Repair in El Campo, TX
- Family-Owned Business
- Trust and Transparency
- Experienced Professionals
- Family-Owned Business
- Trust and Transparency
- Experienced Professionals
Cannell Air Conditioning & Heating repairs furnaces throughout El Campo, TX, and 99% of our service calls are completed on the first visit. Our trucks are stocked, our technicians are NATE certified, and repair labor is warranted for a full year. Request service and a technician will diagnose the fault.
Contact Us
- This site is protected by reCAPTCHA
When to Call a Pro About Your Furnace
A furnace on the Gulf Coast sits unused from spring until the first real cold front, which is exactly why problems surface at the worst possible moment. These are the signs that should not wait.
- The furnace will not ignite
- Cycles on and off repeatedly
- Cold air from the vents
- Burning or gas odor
- Rumbling, banging, or squealing
A gas odor is the exception to everything else on this page. Leave the house, contact your gas utility, and call for service once you are outside and safe.
The rest are diagnostic calls. A furnace that short cycles is telling you something specific, and catching it early usually keeps the repair small.
Furnace Problems We Fix Most Often
Ignition and flame sensing account for the largest share of furnace calls we run. A flame sensor coated with residue after a season of sitting idle will shut the burner down within seconds of lighting, which reads to a homeowner as a furnace that starts and quits.
Airflow problems come next. A filter that has not been changed since the cooling season restricts the blower, and a furnace that cannot move air over the heat exchanger will trip its high-limit switch and shut itself off.
Blower motors, capacitors, and control boards make up much of the remainder. These are wear items, and on a system that has been running a decade or more, one failure often signals that others are close behind.
Heat exchanger cracks are a serious finding. They are less common, but a technician checks for them on every call, because a compromised heat exchanger is a safety issue rather than a comfort one.
Thermostat and control faults are worth ruling out before anything else. A furnace that will not respond at all is sometimes a control problem rather than an equipment failure, and that is a far smaller repair.
How Our Furnace Repair Process Works
Every furnace call runs the same way, whether the system will not light or is simply not keeping up.
- Inspection. A NATE-certified technician checks ignition, gas pressure, airflow, and the heat exchanger.
- Diagnosis. We identify the failed component and what caused it to fail.
- Approval. You get the repair cost before any work begins.
- Repair. Most parts are on the truck, so the fix happens during the same visit.
Our installers and technicians are trained on a regular, ongoing basis and are skilled on all makes and models, so the brand of the furnace does not decide whether we can help.
If the same problem returns within a year, we come back and re-diagnose at no charge under the one-year labor warranty.
Emergency Furnace Repair
A hard freeze on the Gulf Coast does not give much notice, and a furnace that quits on that night is not a problem that waits comfortably for Monday. Emergency service is available by appointment outside our regular Monday through Friday hours.
Service Agreement members receive free priority service 365 days a year, with a technician at the door within 24 hours. Contact us as soon as the system stops so we can get you on the schedule.
If you smell gas, do not wait for us. Leave the house and contact your gas utility first.
Furnace Repair Pricing and Estimates
A diagnostic call is $85, or $75 if you carry a Service Agreement. Our pricing is competitive and fair, with no hidden or surprise costs.
What the repair costs past the diagnostic depends on the failed part, the age and accessibility of the equipment, and whether the heat exchanger is involved. Service Agreement members take 10% off replacement parts and 20% off repair labor.
When a repair is large enough that replacement becomes the better question, we say so and give you a free replacement estimate alongside the repair figure, so you are comparing two real numbers.
Why Homeowners in El Campo Trust Cannell Air Conditioning & Heating
Cannell has repaired furnaces in El Campo since 1966, and the credentials behind that are documented.
- 99% first-visit repair rate
- 210+ years combined technician experience
- License TACLA003986C, fully insured
- BBB Accredited Business, A+ rating
- One-year labor warranty
We are a Carrier Factory Authorized Dealer, we hold the Carrier President’s Award for Excellence for 2019 and 2020, and our technicians are NATE certified.
We repair furnaces in El Campo, Wharton, Bay City, Victoria, Edna, Palacios, Port Lavaca, Eagle Lake, Columbus, and Rosenberg. Request furnace repair service and a technician will diagnose the fault.
Frequently Asked Questions About Furnace Repair
How much does furnace repair cost in El Campo, TX?
The diagnostic call is $85, or $75 for Service Agreement members. The repair cost past that depends on the failed part, and you approve the price before work begins.
Do you offer emergency furnace repair after hours?
Emergency service is available by appointment. Service Agreement members receive free priority service 365 days a year with a technician at the door within 24 hours.
Why does my furnace turn on and then shut off?
Short cycling usually points to a dirty flame sensor, a restricted filter tripping the high-limit switch, or a control fault. All three are common diagnostic calls.
Is furnace repair labor warranted?
Yes. Labor carries a one-year warranty, and if the same fault returns within that year, we return and re-diagnose at no additional charge.
Can you repair a furnace another company installed?
Yes. Our technicians train on all makes and models and repair furnaces regardless of who installed them. We handle any job, no matter how large or small.
