Furnace Repair Services in Eagle Lake, TX

Furnace Repair in Eagle Lake, TX

Hunting season and heating season arrive in Eagle Lake at the same time, and the cold fronts that fill the rice fields with waterfowl are the same ones that put every furnace in Colorado County to the test on the same weekend.

Cannell Air Conditioning & Heating has repaired heating systems in this county since 1966. Family owned, NATE certified, and stocked to finish most repairs on the first visit.

Our Services

Contact Us

* Required fields

Signs Your Furnace Needs Repair

Older homes in and around town tend to give the same warnings year after year.

  • The furnace takes two or three tries to light on a cold morning
  • A grinding or scraping noise from the blower compartment
  • Heat that fades before the thermostat is satisfied
  • Dust or soot visible around supply registers
  • The pilot or ignitor cycles without ever producing a flame
  • The system runs but rooms furthest from the unit stay cold

Soot around registers should be checked before the system runs again.

Furnace Problems We See Most Often

Agricultural dust and older equipment define the Eagle Lake heating call.

  • Flame sensors coated with field dust and residue
  • Burners fouled from a season of airborne particulate
  • Filters loaded well past capacity restricting airflow
  • Hot surface ignitors that fail on their first cycle of the year
  • Aging blower motors and worn bearings
  • Leaky retrofit ductwork losing heat into unconditioned attic space

Cleaning and airflow correction solve a surprising share of these before any part is replaced.

Our Furnace Repair Process Explained

We diagnose the whole heating system, not just the component that stopped. The visit covers the heat exchanger, flue and draft, gas pressure, ignition sequence, and airflow through the ductwork, because in older homes airflow is often the real culprit.

After the diagnosis we explain the finding in plain terms and quote before starting. Our technicians are trained on all makes and models, so the age of the equipment does not limit what we can repair.

A Recent Furnace Repair Call in Eagle Lake

Wayne called the week of the first freeze with a furnace that lit and dropped out three times before locking out. Field dust from harvest had built a film on the flame sensor thick enough to break the signal. We cleaned the sensor and burners, replaced a loaded filter, verified the microamp reading, and ran three complete cycles.

Why Choose Cannell Air Conditioning & Heating

Colorado County is part of our regular service territory.

  • Sixty years in business, family owned since 1966
  • Free estimates from the owner or a technician instead of a salesperson
  • Trucks stocked so 99 percent of service calls are repaired on the first visit
  • One year labor warranty including free return re-diagnosis

Pricing stays competitive and fair, and there are no hidden or surprise costs on the invoice.

Why Homeowners in Eagle Lake, TX Trust Us​

Cat
★★★★★
Excellent customer service from start to finish. Jimmy was knowledgeable, responsive, and efficient in resolving our issue. We truly appreciated his professionalism and attention to detail.
Haley O.
★★★★★
Cannell Air Conditioning & Heating recently replaced our old unit with a brand new one and replaced our duct work in the attic. They did a fantastic job and it only took them 2 days!...
Andrea B.
★★★★★
Cannell Air Conditioning & Heating has serviced my home for over 15 years. They’re always quick to respond and fix any issues with minimal downtime. Reliable, professional, and highly...
Susan E.
★★★★★
The team at Cannell A/C & Heating are prompt, friendly and do an amazing job. They’re incredibly patient with me when I don’t understand and never hesitate to come back just to explain again...
Amy R.
★★★★★
Cannell is the best. They provide clear explanations and options for repairs and their technicians show up quickly. The fact their employees have been with them for so long says a lot!!

Frequently Asked Questions

Does field dust affect a furnace as much as an air conditioner?

It affects it differently but just as much. Airborne particulate coats flame sensors and burners and loads filters, and both of those cause ignition faults and airflow restrictions. In agricultural areas a fall cleaning matters more than most homeowners realize.

That is an ignition lockout after failed flame proving attempts. A dirty flame sensor is the most common cause, followed by a weak ignitor or a gas supply issue. All three are diagnosed on a single visit.

Early fall, before the first front arrives. Everyone calls the same week the temperature drops, and the components that fail are usually ones an inspection would have caught weeks earlier in mild weather.

Most older furnaces are repairable, and we take any job no matter how large or small. If the heat exchanger is cracked, replacement is the safe answer. Otherwise we will give you the repair option and the cost and let you decide.

Two performance tune ups a year, free priority service every day of the year with a technician at the door within 24 hours, discounts on parts and repair labor, coil cleaning, and a one year labor warranty with free re-diagnosis.

Contact Us

* Required fields